
The SPS Combimix is the ideal agitator for mixing slurry in raised tanks or difficult to access slurry pits.
Thanks to the combination of two double-acting cylinders and a t-gearbox this mixer can be used in different positions.
Technical details
- Shaft supported by 3 bearings (Ø 50 mm), ball bearings (45mm) at the tractor end Intermediate bearing for stabilisation and bronze bearing with quadruple sealing and oil bath lubrication
- Three-point hitch system
- Two double-acting hydraulic cylinders
- Throttle to control the cylinder extension speed
- T gearbox
- Wide angle cardan shaft
- Safety bolts, linked to a guide rail
- Stainless steel propeller (2 blades) - double reinforcement (Ø: 600 mm)
- Support feet included as standard
- Counter blade on the ring propeller
- Standard tube length 3 – 4.5m Frame length 3m (total length 6 – 7.5m)
- Rotations: 800 rpm in short-term use, 540 rpm in normal use